Marco Polo Two RC Model Recovery System


Quickly and easily track, locate and recover wayward RC models with the Marco Polo RC Model Recovery System. Simply attach the compact and lightweight tag transceiver to your RC Model, turn it on, and you're ready to fly!

Should you lose control of your RC Model, just put your Marco Polo hand-held locator into track mode. The locator will immediately search for the tag transceiver, and when it acquires the signal give you real-time direction and distance to your model. Just walk, following the arrow and Marco Polo will lead you right to your model, within inches if necessary. If the tag transceiver is initially out of range you can walk or drive around until you come within range and the locator will then guide you directly to the location of your model.

  • Simple to setup and use, single button-push to begin searching for lost RC model with real-time distance and direction feedback
  • Works anywhere, totally self-contained, no GPS or cell network required, no monthly service contracts, ideal for remote areas
  • Rechargeable lithium-ion battery transceiver tag gives you up to 10 days to find your lost model
  • Super small, compact tag transceiver easily fits on even small RC models, weighs only .42 oz. (12 g)
  • Does not interfere with RC radios – Marco Polo only transmits when you activate search mode from the handheld locator
  • Great solution for recovering model rockets as well

Each Marco Polo system supports up to three tag transceivers (system can track one transceiver tag at a time). Click to see what's included with a system purchase…

Here's what's included with your purchase of a Marco Polo RC Model Recovery System:

  • Hand-held locator
  • Two transceiver tags (system supports up to three tags – additional tags sold separately).
  • Plug-in charger and cable for locator and transceiver tag recharging. Note: Additional chargers and cables may be purchased separately.
  • User reference manual

SKU: MP-201-RC Category:

System Radio Frequency Operational Specs.

  • Method – Frequency Hopping Spread Spectrum (FHSS) 50 Channels
  • Band: ISM 902.5 Mhz. – 906.5 Mhz.
  • License Requirements: ISM/unlicensed, operates under FCC Part 15 Section 247
  • Modulation: FSK
  • Single Frequency Dwell Time: 50 msec. once every 4 mins.
  • Receiver Sensitivity: -125 dBm
  • Communications Coding: Data coding and forward error correction allow the system to operate with a BER as low as 1:10, significantly improving overall system range.

System Range

  • Line of sight: up to 2 miles typical
  • Open terrain, rolling hills with few obstructions: up to .5 – 1 mile
  • Dense suburban areas: 2,000 ft. typical

† Ranges shown are typical under controlled testing. Your results will vary with your actual conditions.

System Capacity

  • Up to 3 transceiver tags per Locator

Alarm Capacity

  • Internal audible alarm
  • External siren alarm (optional)
  • External auto dialer (optional – requires telco landline)

Locator Physical Specifications

  • Height: 6 in. (152 mm)
  • Width: 3.5 in. (90 mm)
  • Depth: 1.5 in. (44 mm)
  • Weight: 7.8 oz. (221 g)

Locator Battery and Charge Capacity

  • Rechargeable Li•ion battery (included)
  • 3 days when in continuous tracking mode
  • 8 hours in searching mode
  • 3 days in monitor mode

† Battery charge life values shown are typical. Your experience may vary with your actual use, battery age and ambient temperature.

Locator Weatherproofing

  • Light rain

Tag Transceiver Physical Specifications

  • Height: 2 in. (64 mm)
  • Width: .93 in. (23.62 mm)
  • Depth: .5 in. (12.7 mm)
  • Weight: .42 oz. (12 g)

Tag Transceiver Battery and Charge Capacity

  • Rechargeable lithium polymer battery, included (non-user serviceable)
  • 10 days idle mode
  • 3 days tracking mode
  • 30 days monitor mode

† Battery charge life values shown are typical. Your experience may vary with your actual use.

Tag Transceiver Weatherproofing

  • None

Package Dimensions

  • Length: 7 in. (179 mm)
  • Width: 10 in. (25 4mm)
  • Height: 3 in. (89 mm)

Shipping Weight

  • 1.25 lb. (.57 kg)

Marco Polo RC Model Recovery System Documentation Downloads (PDF format)
User Manual (725KB)

30-Day Refund Policy

If for any reason you are dissatisfied with your purchase you may return it within 30 days for a full refund of the price paid plus the original shipping charges. Returned products must be complete and in good condition to receive the full refund amount.

Return Procedure for Refunds

To return the product for a refund: Contact Eureka Technology Partners by phone, mail or email: click here for our contact information. Provide your Name, Address, email address and order number (if available) as well as the reason for returning the product. We will supply you with return instructions on the phone or via return email.

Other Warranty Information

You can view our complete warranty and return policies by clicking here.